Set All Tracks to Solo Vegas Pro

You can change the color of your tracks to create logical track groups.

To change a track's color, right-click the header and choose Track Display Color from the shortcut menu. Choose a color from the submenu to change the icon in the track list and the waveform in the timeline.

Use the Display tab in the Preferences dialog to edit the available colors.

Drag a track's bottom border to set its height. If you want to set a track's height as the default height for new tracks, you can right-click within the track list and choose Set Default Track Properties from the shortcut menu.

Click Minimize to minimize a track vertically.

Click Maximize to zoom in vertically so a track fills the track view.

After minimizing or maximizing a track, click the Minimize or Maximize button again to return a track to its previous height.

Track height keyboard shortcuts

Press Ctrl+Shift+Up Arrow or Down Arrow to change the height of all tracks at once.
Press ` to minimize all tracks. Press again to restore tracks to their previous height. When restoring track height, tracks that you previously minimized are not restored—you can restore these tracks by clicking the Restore Track Heigh t button on the track header.
Press Ctrl+` to return all tracks to the default height.

Double-click in the Scribble Strip and type the track name.

If you do not see the Scribble Strip, expand the track to reveal it. The Scribble Strip appears above the Volume fader
Press Enter to save the name.

The bus button in a track header chooses the track's primary output. Assigning tracks to busses is especially useful for creating submixes that allow you to adjust the levels of multiple tracks at once or apply an effect to multiple tracks.

Vegas Pro trackoutputdevice Adjusting Audio Track Controls

Click the bus button on the track.

The button is displayed as a when the track is routed to the master bus, and the bus letter is displayed (, , and so on) when a track is routed to another bus.
Select the desired bus from the submenu. The Bus button changes to display the selected bus.

If the Bus button does not appear on the track, then you have not specified more than one bus in your project settings. For more information on specifying the number of busses for your project, click here.

If you want to send a track to multiple outputs — for creating cue mixes or effects sends — you can use the multipurpose fader to control the level of the track sent to each bus or assignable effects chain.

Vegas Pro multipurposefader Adjusting Audio Track Controls

Click the Invert Track Phase button to reverse the phase of all events on an audio track.

Although inverting data does not make an audible difference in a single file, it can prevent phase cancellation when mixing or crossfading audio signals.

Select multiple tracks to invert several tracks simultaneously.

If the Invert event switch is selected, inverting the phase of the track will return the event to its original phase.

Click the Mute button to prevent a track from being played in the mix. Click the Mute button on additional tracks to add them to the mute group. To unmute a track, click the Mute button again.

Muting a track mutes its main output and post-fader sends only unless the Track prefader sends listen to mute check box on the Audio tab of the Preferences dialog is selected. For more information and examples about how the Track prefader sends listen to mute check box works, please see Preferences – Audio Tab.

Muting or unmuting a track

Click the Automation Settings button and verify Show Automation Controls is not selected.
Click the Mute button .

When you have a group of tracks muted, hold Ctrl while clicking the Mute button on an unmuted track to remove all other tracks from the mute group. Hold Ctrl while clicking the Mute button on a muted track to reset all Mute buttons.

Adjusting mute automation

When you click the Automation Settings button and select Show Automation Controls, the Mute button is displayed as , and you can use the button to edit mute automation.

Click the Solo button to mute all unselected tracks. Click the Solo button on additional tracks to add them to the solo group. To remove a track from the solo group, click its Solo button again.

Hold Ctrl while clicking a Solo button to solo a single track and remove all other tracks from the solo group.

The fader in the track header can function as a trim control that adjusts the overall volume of the track, or it can adjust track volume automation settings.

The trim level is added to the volume automation settings so your envelope is preserved, but with a boost or cut applied. For example, setting the trim control to -3 dB has the same effect as decreasing every envelope point by 3 dB.

When adjusting the mix of your tracks, remember to look at the meters on the Mixer. Because you are adding the volumes of all of the tracks together, it is easy to clip the audio output. Make sure that the meters never display the red Clip indication during playback.

Adjusting the volume trim level

Click the Automation Settings button and verify Show Automation Controls is not selected.
Drag the Vol fader to control how loud a track is in the mix.

A value of 0 dB means that the track is played with no boost or cut. Dragging the fader to the left cuts the volume; dragging to the right boosts the volume.

You can hold Ctrl while dragging a fader to adjust the setting in finer increments, or double-click the fader to return it to 0 dB.

If multiple tracks are selected, all selected tracks are adjusted.

Adjusting the volume automation level

When you click the Automation Settings button and select Show Automation Controls, the fader thumb is displayed as a , and you can use the control to edit volume automation.

The multipurpose slider in the track header can function as a trim control that adjusts the overall panning of the track, or it can adjust track panning automation settings.

The trim level is added to the pan automation settings so your panning envelope is preserved, but with an offset applied. For example, setting the trim control to -9% left has the same effect as moving every envelope point 9% to the left.

Adjusting track panning trim levels

Click the Automation Settings button and verify Show Automation Controls is not selected.
Click the label on the multipurpose slider and choose Pan from the menu.
Drag the slider to control the position of the track in the stereo field: dragging to the left will place the track in the left speaker more than the right, and dragging to the right will place the track in the right speaker.

You can hold Ctrl while dragging the slider to adjust the setting in finer increments, or double-click the slider to return it to 0.

If multiple tracks are selected, all selected tracks are adjusted.

Adjusting the track panning automation level

When you click the Automation Settings button and select Show Automation Controls, the Pan slider handle is displayed as a , and you can use the control to edit pan automation.

Right-click the fader handle and choose a pan type to change the behavior of the Pan slider. For more information about pan modes, click here.

The se
lected panning mode is also used for track-level pan envelopes.

The multipurpose slider in the track header can function as a trim control that adjusts the overall assignable effects send level of the track, or it can adjust assignable effects send automation settings.

The trim level is added to the assignable effects automation settings so your envelope is preserved, but with a boost or cut applied. For example, setting the trim control to -3 dB has the same effect as decreasing every envelope point by 3 dB.

Tips :

FX sends are post-volume by default. To change to pre-volume, right-click the FX fader and choose Pre Volume from the shortcut menu.
If you want to apply track panning (including pan position and panning mode) to FX sends, right-click the FX fader and choose Link to Main Track Pan from the shortcut menu.

When Link to Main Track Pan is not selected, the track sends a center-panned stereo signal using the track's current panning mode.
Select the Use legacy track send gain check box on the Audio page of the Preferences dialog if you want to configure audio track sends to behave as they did in 7.0 and earlier. When the check box is selected, you can open projects created with earlier versions of and be assured they will sound the same as they did in earlier versions of .

Adjusting the assignable effects trim level

Click the Automation Settings button and verify Show Automation Controls is not selected.
Click the label on the multipurpose slider and choose an assignable effects chain from the menu.
Drag the FX fader to control the level of the track sent to each of the assignable FX chains that you have created. Dragging the fader to the left cuts the volume; dragging to the right boosts the volume.

You can hold Ctrl while dragging a fader to adjust the setting in finer increments, or double-click the fader to return it to 0 dB.

If multiple tracks are selected, all selected tracks are adjusted.

Adjusting the assignable effects automation level

When you click the Automation Settings button and select Show Automation Controls, the fader thumb is displayed as a , and you can use the control to edit assignable effects send level automation.

The multipurpose slider in the track header can function as a trim control that adjusts the overall bus send level of the track, or it can adjust bus send automation settings.

The trim level is added to the bus send automation settings so your envelope is preserved, but with a boost or cut applied. For example, setting the trim control to -3 dB has the same effect as decreasing every envelope point by 3 dB.

Tips:

Bus sends are pre-volume (and pre-mute) by default. When bus sends are pre-volume, you can create a cue mix that is independent of your main mix (like the monitor out on a hardware mixer). To change to post-volume, right-click the bus fader and choose Post Volume from the shortcut menu. Post-volume sends are useful for effects sends because the send pays attention to the track's volume and mute controls.

If you want to apply track panning to bus sends (including pan position and panning mode), right click the bus fader and choose Link to Main Track Pan from the shortcut menu.

When Link to Main Track Pan is not selected, the track sends a center-panned stereo signal using the track's current panning mode.
Select the Use legacy track send gain check box on the Audio page of the Preferences dialog if you want to configure audio track sends to behave as they did in 7.0 and earlier. When the check box is selected, you can open projects created with earlier versions of and be assured they will sound the same as they did in earlier versions of .

Adjusting the bus send trim level

Click the Automation Settings button and verify Show Automation Controls is not selected.
Click the label on the multipurpose slider and choose a bus from the menu.
Drag the fader to control the level of the track sent to each of the additional busses that you have created for your project. Dragging the fader to the left cuts the volume; dragging to the right boosts the volume.

You can hold Ctrl while dragging a fader to adjust the setting in finer increments, or double-click the fader to return it to 0 dB.

If multiple tracks are selected, all selected tracks are adjusted.

Adjusting bus send automation

When you click the Automation Settings button and select Show Automation Controls, the fader thumb is displayed as a , and you can use the control to edit bus send level automation.

The controls in the track header can function as trim controls or automation controls for track volume, panning, assignable effects send, and bus send levels. Adjusting the trim control affects the level of the entire track as it did in previous releases of .

The trim level is added to the track automation setting so your automation settings are preserved, but with a boost or cut applied. For example, setting the trim control to -3 dB has the same effect as decreasing every envelope point by 3 dB.

To adjust trim levels, click the Automation Settings button and verify Show Automation Controls is not selected. When Show Automation Controls is selected, the volume fader and multipurpose slider adjust automation settings.

Audio Track Controls

The controls in the track list allow you to adjust track volume, panning, phase, assignable FX send levels, and bus send levels.

Vegas Pro multipurposefader Adjusting Audio Track Controls

To move faders and sliders in fine increments, hold Ctrl while dragging the control.

What do you want to do?

Change a track's color

Change a track's height

Assign a name to a track

Assign a track to a bus

Invert the phase of a track

Mute a track

Solo a track

Adjust a track's volume

Pan a track

Change the pan mode

Adjust an assignable effects send level

Adjust a bus send level

Adjust trim levels

Adjusting Audio Track Controls

Set All Tracks to Solo Vegas Pro

Source: http://vegaspro.helpmax.net/en/using-vegas-software/using-markers-regions-and-commands/adjusting-audio-track-controls/